technical characteristics Lincoln Mark VII 1987 - 1992

Technical characteristics of Lincoln Mark VII 1987, 1989, 1989, 1990, 1991, 1992: power, fuel consumption per 100 km, weight (mass), road clearance (clearance), radius of reversal, type of transmission and brakes, body size and tires

Engine characteristics

Modifications Engine volume, cm3 Power, kW (lp)/about Cylinders Twisting, Nm/(rpm) Type of the fuel system Type of fuel
Bill Blass USA 4949 (225)/- V-shaped: V8 (407)/- Distributed injection -
LSC USA 4949 (225)/- V-shaped: V8 (407)/- Distributed injection -

Engine configuration

Modifications Compression ratio Cylinder diameter and piston stroke (mm) Location of valves and camshaft
Bill Blass USA 9.0 101.6 x 76.2 -
LSC USA 9.0 101.6 x 76.2 -

Drive and transmission

Modifications type of drive Type of transmission (basic) Type of transmission (optionally)
Bill Blass USA Rear drive 4-ACPP (Overdrive)
LSC USA Rear drive 4-ACPP (Overdrive)

Suspension type and turning radius

Modifications Front suspension Rear suspension The diameter of the turn, m
Bill Blass USA Independent Dependent 12.2
LSC USA Independent Dependent 12.2

The size of the tires

Modifications The size
Bill Blass USA 215/70R15
LSC USA 225/60R16

Dimensions

Modifications Length, mm Width, mm Height, mm The track front/back, mm Wheel base, mm Road clearance (clearance), mm Trunk volume, l
Bill Blass USA 5151 1801 1377 1483/1499 2756 - -
LSC USA 5151 1801 1377 1483/1499 2756 - -

Car weight

Modifications Equipped mass, kg Maximum mass, kg Lifting capacity, kg
Bill Blass USA 1701 - -
LSC USA 1717 - -

Number of seats and doors

Modifications The number of seats Number of doors
Bill Blass USA 5 2
LSC USA 5 2

Fuel consumption

Modifications In the city, l/100 km On the highway, l/100 km Average consumption, l/100 km Extrication CO2, g/km Type of fuel
Bill Blass USA 13.8 9.8 11.8 -
LSC USA 13.8 9.8 11.8 -

Configuration Lincoln Mark VII 1987 - 1992