Honda CR-V reviews 1996 - 2001
Honda CR-V1996 - 2001 are collected from masters and engineers of service stations for an objective assessment of reliability and features of the CR-V operation.
| Engine |  |
Sometimes there are problems with exhaust valves and their nests. With strong wear, the valves may catch fire. |
| Transmission |  |
With the backlash, the crosses of the cardan shaft requires a replacement of the cardan shaft assembly. |
| Control system and suspension | |
Of course, the large silent blocks of the rear longitudinal levers of the rear suspension (rear silent block - 565 rubles; work -2.5 normal hours). |
| Brake system |  |
minimum Repair Cost Problems |
| Heated air and air conditioning | |
minimum Repair Cost Problems |
| Start and Charging System | |
minimum Repair Cost Problems |
| Electrical components and other | |
minimum Repair Cost Problems |
| Body stability to corrosion | No data |
* Information collected from specialists from service stations
|
Minimum Repair Cost Problems |
|
Medium problems |
|
Serious problems with high repair cost |
your comment
Is it possible to replace crossmen separately?
To answerVasily, only replacement of cardan assembly
To answerI changed my native Kardan, on the Cardan from Niva, now I only change the crossmen (from Niva naturally) for 70 rubles. For half a day, the cardan was redone. It was at the beginning of spring, there are no problems yet.
To answerDavid, an excellent solution. I will try in the near future, since the Cardana replacement is
To answerDavid, thanks for the decision, the alteration cost only in 2000
To answerhi all! I changed the crossbars myself in the garage, the replacement of the cardan is not required, everything is much easier,
To answerEugene, well, enlighten the public, otherwise I gathered together with the cardan already change, I did not have the service: only with Cardan.
To answerHello .. in my sierava car 2000 g. In the air duct before connecting to the driver I saw a lot of oil .. do not tell me the reason why oil has accumulated there ?? Speak
To answersomething hardly believes ... The cross is not on the locking rings there, but on the rolling. There is no problem, but whether to keep after the assembly. Of course, if the garage stands the machine in the center and the crosses of the Cross, then it is possible, but the hemora of a lot ... He himself disassembled such crosses ....
To answerHow to put the vertebrae 89120306878
To answerVibration appears after a certain kilometer will not understand that please tell me
To answerhow to do it
To answeryou can, separately sold crossmen for CP-B. I myself personally changed
To answerVasily Crosss change the current robot costs 5000 thousand tenge for 1 cross
To answercrosses can be done. Checked ..
To answerYou can have it !!
To answeryou could have cost 9000 Cardan costs 10,000 on disassembly. But for the 9000th got painted, from a balconged and new reptiles
To answerGuys, such a problem: already 2 batteries went through, and they discharge, despite the fact that charging from the generator goes normal.
To answerIf the battery is too high, then the generator may not cope and the AKU will be discharged
To answerI had such a situation in inexperienced: I put 2.3 p 90 mAh for Ford Sierra. Akum was new and constantly discharged, despite the fact that the dummy went as it should
To answerLapot
To answerChange the brushes of the starter Charging goes through the starter !!
To answerOr maybe through the muffler? Smart ass...
To answerIf it goes the root when the steering wheel is rotated in place, it fails the power of the steering wheel?
To answerProbably yes
To answerIt may not be necessary to simply add the ATF liquid into the hydraulic tank
To answerWhen is the timing belt and whether the valve will bend a 2-liter engine? How much is about replacement ??
To answerLong oil in hydrachic checked?
To answerhere you are a zhiguleyody. If the hydraulicel is buzzing on the Jap, just need to fasten the burning there and not to change immediately
To answercouple \u003cbr/\u003e
To answeri have Honda Srv 1996 recently drove along the highway and there was a strong vibration under the car. One hundred people said to change the suspension cardan, changed, but drove only 1 km and the vibration appeared again, it is impossible to ride what it is. Tell me what to do
To answerFrom the suspended vibration there is no reason, the Kardan Kardan himself or the slot crashed !!
To answerGood day! \u003cbr/\u003e My box does not work when I try to leave in the morning, I switched on R and does not go, Opel Vectra 1996 G.V. 1.6. Tell me, please, what can it be? The oil changed in the box.
To answerin the repair you need your box, on the bulkhead
To answermINIYY KOROPKU !!!
To answeri have a golf3 university.93 when driving, when the engine turnover and the inclusive speed does not match, although it is not necessary, it starts to pull the car, as if there is no gasoline. It is necessary that there is no gasoline! They said that because of the gas benzo pump, but He stands new! Who is in the course tell me !!!? \u003cbr/\u003e
To answerMaybe the problem is in the clutch
To answerin what plan? disk sticks out?
To answerthe disc is not exactly erased here and tweats
To answerif the mechanic box then change the clutch discs.
To answerif the mechanic box then change the clutch discs.
To answergood day, I have Mitsubishi Galant 88g. 2LTER AUTOMATING.-Tanned light bulb on the -power panel /. What is it? I haven't burned before))
To answerI have a jeep team caught up. Yellow paw is drawn type engine What does this mean?
To answerThe most likely reasons 1. Lambda-probe failed (more likely that the one that measures the exhaust toxicity than the one that adjusts the mixture) 2. The suctioner of gasoline vapor from the gas tank does not work (if the hiss is heard when opening the cover) 3. Not twisted fuel cap. In general, it is necessary to consider the number of errors from autoelchik, by the number of the error it will be known what cause
To answerin my car caught fire a question mark on the scoreboard, tell me what means
To answerBrand, model?
To answergood afternoon. I have a Volkswagen Sharan 1997 Obsem 2. The engine does not develop turnover not tell me the reason
To answerTell me how to remove P \u003cbr/\u003e \u003cbr/\u003e DIMENTIVE HONDA CR-V 2000 AMERICAN
To answerhelp please. If you press the gas on the go on the right front side, the noise is unpleasant. Very. Listed all the moved, the pads replaced, the fingers are good. What may be, I can not imagine.
To answerMaybe the bearing of the drive semi-axis is broken, usually put such a diagnosis when the reason is not clear
To answerWhat sensors have a relationship of Honda Honda SRV Right Handlebar 1996 If with a cold engine automatic box begins to twitch. How the engine is well warm the box automatic works normally
To answerSeparately, the GMC crosses are sold to both the gazelles, centered in the ears of the caliper, is applied to reliability. Curly welding - 40,000 TCM drove it already.
To answerWelding ruins lubricant and needles. It is much easier to bone on 8 points specifically with a sharpening chisel. Changed repeatedly, everything is simple.
To answerat low heat machines, the stove heated glass and everything is connected with it.
To answertell me, changed the front-speed bears, both ABS are also lit by the handbrake what the reason was told the magnetic field the weak PRVADa or not
To answerAnd I was engaged in the repair of the cardan shaft through the service. The suspension and the cross changed in the cardanbalance.
To answerPlease tell me Honda S.R.V. In the summer, it starts from the second time, the candles are new, benz .. the new, the failure, a thromler, everything is normal. And the last time on small turns is all right away, and when you press sharply gas it raises and then breaks.
To answerenlighten how the amount of oil is poured into the GUR, in the automatic box, in the rear axle and distribution if you can type and oil brand
To answerI have a Honda's right-hander. All this is a lie that the cardan must be changed in the collection, and we have removed the cardan and changed the crossbar was balanced on the micron lathe and everything was not the slightest beat. I accelerated the car to 170. The truth can only be done on the Japanese he has Cardan Polavnitsa.
To answerand how to change the suspended in the cardan ???
To answeris it possible to ride on the nitra
To answerDo not try - scribe box.
To answerVibration is the strongest only when overclocking on the whole body, Honda SRV 2000 yd RD1 Arab, replaced the inner grenades - a much walled, but did not disappear. Cartan rebel removed, the motor cushions replaced .tel.87774950023.
To answerSee the rear shoes (grenades). In order to diagnose the cardan and the train without it, if the vibration disappeared. So disassemble with the rear transmission.
To answerVibration is the strongest only when overclocking on the whole body, Honda SRV 2000 yd RD1 Arab, replaced the inner grenades - a much walled, but did not disappear. Cartan rebel removed, the motor cushions replaced .tel.87774950023.
To answerbearings of internal drive grenades are broken
To answerTell me which cardan from the Niva is suitable for Honda Wed-in 2001
To answerlight tpms What does it mean?
To answerhello! Please tell me. Honda Honda Srv 1996 on the cold will start the first time. Everything goes fine, but it is only worth squeezing the car, it does not start. It is necessary to wait about 40 minutes while cooling. The temperature of the temperature changed, injection was cleaned, the farcers were changed. Everything also remains.
To answercheck out the starter
To answersuch a problem: not a pleasant noise from the front to the CP-in 1996 Bearings (hubs) changed, did not get rid of noise. It was a hundred after the diagnosis they said that noise in the box. Maybe someone knows what (contract box costs already 3) switches smoothly no problems
To answerHonda CRV Big Consumption Gasoline Advise How Thank you
To answerLarge consumption of gasoline Honda CRV-1996g.v.
To answerHonda Honda CR-in 1996 And there is no rear cardan at all, tell me how to remake the Cardan from Niva? If there is a solution to this problem, tell me how. Thanks in advance.....................
To answerHello. I stopped riding Honda SRV. Percesses agreed any back and in the pond. Well, not going. I didn't buy before changing the box. Please tell me.
To answerbox in repair. Skill burned friction.
To answerHonda SRV float turnover What to do?
To answerIt is necessary to remove the exhaust gas recycling valve to rinse it, blow and in place. I had it, and more than once.
To answerhum in the hodovka at 50 and higher, as if on spikes
To answerGood morning! Tell me who knows how many slots in the semi-axes of the front drive in Honda CR-V 2001 GV With a 4-speed automatic transmission. Please, very necessary (
To answerwhy the temperature is rising at the European 99g
To answerI have Honda SRV 2000. Not long ago there was a problem on the move while driving the car alone sore. Help me to understand. Thanks.
To answer